Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sun, Haomin; Kunugi, Tomoaki*; Yokomine, Takehiko*; Shen, X.*; Hibiki, Takashi*
Experimental Thermal and Fluid Science, 154, p.111171_1 - 111171_24, 2024/05
Times Cited Count：0Yuan, X.*; Hu, Q. H.*; Fang, X.*; Wang, Q. M.*; Ma, Y.*; Tachi, Yukio
Sedimentary Geology, 465, p.106633_1 - 106633_14, 2024/05
Yamashita, Kiyoto; Maki, Shota; Yokosuka, Kazuhiro; Fukui, Masahiro; Iemura, Keisuke
JAEA-Technology 2023-023, 97 Pages, 2024/03
JAEA-Technology-2023-023.pdf:8.21MB
The incinerator adopted to incineration room, Plutonium Waste Treatment Facility had been demonstrated since 2002 for developing technologies to reduce the volume of fire-resistant wastes such as vinyl chloride (represented by Polyvinyl chloride bags) and rubber gloves for Radio Isotope among radioactive solid wastes generated by the production of mixed oxide fuels. The incinerator, cooling tower, and processing pipes were replaced with a suspension period from 2018 to 2022, which fireproof materials on the inner wall of the incinerator was cracked and grown caused by hydrogen chloride generated when disposing of fire-resistant wastes. This facility consists of the waste feed process, the incineration process, the waste gas treatment process, and the ash removal process. We replaced the cooling tower in the waste gas treatment process from March 2020 to March 2021, and the incinerator in the incineration process from January 2021 to February 2022. In addition, samples were collected from the incinerator and the cooling tower during the removing and dismantling of the replaced devices, observed by Scanning Electron Microscope and X-ray microanalyzer, and analyzed by X-ray diffraction to investigate the corrosion and deterioration of them. This report describes the method of setting up the green house, the procedure for replacing them, and the results from analysis in corrosion and deterioration of the cooling tower and incinerator.
Togawa, Orihiko; Hokama, Tomonori; Hiraoka, Hirokazu; Saito, Shota
JAEA-Research 2023-011, 78 Pages, 2024/03
JAEA-Research-2023-011.pdf:2.09MB
When radionuclides are released into the atmospheric environment at a nuclear emergency, protective measures such as evacuation and temporal relocation are carried out using motor vehicles such as private cars and buses to reduce radiation exposure to residents. To confirm conditions of contamination for the evacuated/relocated residents and the used motor vehicles, contamination inspection is conducted in the middle of the route from border areas of Nuclear Emergency Planning Zone to evacuation shelters. In the present inspection in Japan, a value of OIL4 = 40,000 cpm is used as decontamination criteria. For the details and derivation methods of the value, however, no official documents are found which give systematically detailed descriptions and explanation. It is also recognized that even few experts on nuclear emergencies can explain these subjects in detail as a whole. In order to explain scientifically and technically the OIL4 value of decontamination criteria used in contamination inspection in Japan, this report aims at investigating and estimating the deviation methods of OIL4, and examining and considering these results. To achieve the objectives, we show the bases for decontamination criteria, and investigate and estimate the derivation methods for limits of a surface contamination density corresponding to the generic criteria for each exposure pathway. Moreover, we give the OIL4 value some consideration and suggestions from a viewpoint of positioning and feature of OIL4 in Japan, and cautionary points at revising the value.
Project Promotion Department; Radioactive Wastes Disposal Center
JAEA-Review 2023-037, 162 Pages, 2024/02
JAEA-Review-2023-037.pdf:2.66MB
For near surface disposal of radioactive wastes generated from research, industrial and medical facilities, Japan Atomic Energy Agency has discussed methods for corresponding to the technical standards on confirmation related to waste disposal, etc. From FY2022, we have established Waste Standards Committee and interim Waste Acceptance Criteria, Waste Package Confirmation Procedure, etc. have been considered. In FY2022, Waste Package Confirmation Procedures of solidified liquid waste and cement filled waste and related standards were discussed. In addition, issues of preparation of Waste Package Confirmation Procedure and rational treatment method for decommissioning wastes were considered. This annual report summarizes the results of discussion in FY2022.
Amaya, Masaki
High Temperature Corrosion of Materials, 15 Pages, 2024/00
Times Cited Count：0 Percentile：0.02(Metallurgy & Metallurgical Engineering)Kim, M.; Malins, A.*; Machida, Masahiko; Yoshimura, Kazuya; Saito, Kimiaki; Yoshida, Hiroko*
Nihon Genshiryoku Gakkai Wabun Rombunshi (Internet), 22(4), p.156 - 169, 2023/11
Dose reduction factor of a Japanese house is important information in the external exposure estimation of returning residents. In 2019, a total of 19 wooden houses were surveyed in Iitate Village and Namie Town using a gamma plotter that can continuously measure the air dose rate. In addition, the characteristics of the reduction factor were investigated from the measured air dose rate. In the vicinity of houses, uncontaminated areas exist underneath houses and, the ratio of paved surfaces such as asphalt roads is relatively high; furthermore, the pavement has a tendency for the radiation source to decay quickly. Therefore, the air dose rate near the house showed a relatively low value in common at all sites. Air dose rates above unpaved surfaces showed higher values and larger variations than those above paved surfaces within a radius of 50 m form the center of a house. The reduction factor was widely distributed even for one house, if the ratio of every air dose rate observed inside and outside the house is considered. It is suggested that a realistic reduction factor may not be obtained when the reduction factor is obtained based on the measured values at a small number of points that do not have the representativeness of the radiation field to be measured.
Department of HTTR
JAEA-Review 2023-016, 82 Pages, 2023/09
JAEA-Review-2023-016.pdf:2.31MB
The High Temperature Engineering Test Reactor (HTTR) is the first Japanese High Temperature Gas-cooled Reactor (HTGR) with 30MW in thermal power and 950
C of maximum outlet coolant temperature that is constructed by the Japan Atomic Energy Agency located at Oarai-machi, Higashiibaraki-gun, Ibaraki-ken, Japan. The purpose of the HTTR is establishment of basic HTGR technologies, demonstration of HTGR safety characteristics and so on. The HTTR has had a lot of experience of HTGRs' operation and maintenance throughout rated power operations, safety demonstration tests, long-term high temperature operations and demonstration tests relevant to HTGRs' R&Ds. In the fiscal year 2021, as the HTTR completed activities to conform to the New Regulatory Requirements of Nuclear Regulation Authority, The HTTR restarted since the 2011 off the Pacific coast of Tohoku Earthquake and carried out the Loss-of-forced cooling test without Vessel Cooling System (VCS) operational at 9MW (Three gas circulators trip and VCS is stopped.) as the safety demonstration test. This report summarizes the activities carried out in the fiscal year 2021, which were the situation of the New Regulatory Requirements screening of the HTTR, the operation and maintenance of the HTTR, R&Ds relevant to commercial-scale HTGRs, the international cooperation on HTGRs and so on.
Suzuki, Seiya; Nemoto, Yoshihiro*; Shiiki, Natsumi*; Nakayama, Yoshiko*; Takeguchi, Masaki*
Annalen der Physik, 535(9), p.2300122_1 - 2300122_12, 2023/09
Times Cited Count：0 Percentile：0(Physics, Multidisciplinary)Sun, Haomin; Kunugi, Tomoaki*; Yokomine, Takehiko*; Shen, X.*; Hibiki, Takashi*
International Journal of Heat and Mass Transfer, 211, p.124214_1 - 124214_17, 2023/09
Times Cited Count：2 Percentile：53.66(Thermodynamics)Wang, Q.*; Ma, N.*; Huang, W.*; Shi, J.*; Luo, X.-T.*; Tomitaka, Sora*; Morooka, Satoshi; Watanabe, Makoto*
Materials Research Letters (Internet), 11(9), p.742 - 748, 2023/09
Esser, S. P.*; Rahlff, J.*; Zhao, W.*; Predl, M.*; Plewka, J.*; Sures, K.*; Wimmer, F.*; Lee, J.*; Adam, P. S.*; McGonigle, J.*; et al.
Nature Microbiology (Internet), 8(9), p.1619 - 1633, 2023/09
Times Cited Count：2 Percentile：75.4(Microbiology)Maruyama, Yu; Sugiyama, Tomoyuki*; Shimada, Asako; Lind, T.*; Bentaib, A.*; Sogalla, M.*; Pellegrini, M.*; Albright, L.*; Clayton, D.*
Proceedings of 20th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-20) (Internet), p.4782 - 4795, 2023/08
sp
HRLSawada, Atsushi; Sakamoto, Kazuhiko*; Watahiki, Takanori*; Imai, Hisashi*
SKB P-17-06, 154 Pages, 2023/08
Nuclear Science Research Institute, Sector of Nuclear Science Research
JAEA-Review 2023-009, 165 Pages, 2023/06
JAEA-Review-2023-009.pdf:5.76MB
Nuclear Science Research Institute (NSRI) is composed of Planning and Management Department and six departments, namely Department of Operational Safety Administration, Department of Radiation Protection, Engineering Services Department, Department of Research Reactor and Tandem Accelerator, Department of Criticality and Hot Examination Technology and Department of Decommissioning and Waste Management, and each department manages facilities and develops related technologies to achieve the "Medium- to Long-term Plan" successfully and effectively. And, four research centers which are Advanced Science Research Center, Nuclear Science and Engineering Center, Nuclear Engineering Research Collaboration Center and Materials Sciences Research Center, belong to NSRI. In order to contribute the future research and development and to promote management business, this annual report summarizes information on the activities of NSRI of JFY 2020 as well as the activity on research and development carried out by Collaborative Laboratories for Advanced Decommissioning Science, Nuclear Safety Research Center and activities of Nuclear Human Resource Development Center, using facilities of NSRI.
Cs transfer from soils contaminated by resuspended particles to Japanese mustard spinach in difficult-to-return zone of FukushimaTatsuno, Takahiro*; Nihei, Naoto*; Yoshimura, Kazuya; Ote, Nobuhito*
Journal of Radioanalytical and Nuclear Chemistry, 332(6), p.1677 - 1686, 2023/06
Times Cited Count：1 Percentile：68.31(Chemistry, Analytical)Takino, Kazuo; Oki, Shigeo
JAEA-Data/Code 2023-003, 26 Pages, 2023/05
JAEA-Data-Code-2023-003.pdf:1.66MB
Since next-generation fast reactors aim to achieve a higher core discharge burn-up than conventional reactors do, core neutronics design methods must be refined. Therefore, a suitable analysis condition is required for the analysis of burn-up nuclear characteristics to accomplish sufficient estimation accuracy while maintaining a low computational cost. We investigated the effect of the analysis conditions on the accuracy of estimation of the burn-up nuclear characteristics of next-generation fast reactors in terms of neutron energy groups, neutron transport theory, and spatial mesh. This study treated the following burn-up nuclear characteristics: criticality, burn-up reactivity, control rod worth, breeding ratio, assembly-wise power distribution, maximum linear heat rate, sodium void reactivity, and Doppler coefficient for the equilibrium operation cycle. As a result, it was found that the following conditions were the most suitable: 18-energy-group structure, 6 spatial meshes per assembly with diffusion approximation. Additionally, these conditions should apply to correction factors for energy group structure, spatial mesh and transport effects.
Sakai, Akihiro
Dekomisshoningu Giho, (64), p.24 - 33, 2023/05
Japan Atomic Energy Agency (JAEA) has proceeded with the project of near surface disposal of radioactive waste generated from research facilities, etc. as the implementing body. On the other hand, Nuclear Regulation Authority (NRA) has established the safety regulations and standards for the operation of the disposal facilities. This report outlines the disposal project of JAEA and the development of the regulations and standards for the disposal by NRA.
Ota, Hirokazu*; Ogata, Takanari*; Yamano, Hidemasa; Futagami, Satoshi; Shimada, Sadae*; Yamada, Yumi*
Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05
pellet in molten Zr claddingIto, Ayumi*; Yamashita, Susumu; Tasaki, Yudai; Kakiuchi, Kazuo; Kobayashi, Yoshinao*
Journal of Nuclear Science and Technology, 60(4), p.450 - 459, 2023/04
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)